Main
The features of the “PleskovDoor” interior doors production: Closed Joint Stock Company “Lesozavod” (Rzhev)
The features of the “PleskovDoor” interior doors production: Closed Joint Stock Company “Lesozavod” (Rzhev)The features of the PleskovDoor interior doors production: Closed Joint Stock Company “Lesozavod”
“Lesozavod” production association exists since 1998 and provides a full cycle of the wood processing. “PleskovDoor” interior doors are made on the modern imported equipment. The existing capacities allow to produce smooth and milled interior doors.
The main design features of “PleskovDoor” doors which distinguish them from most of similar doors are as below:
1. The thickness of the door leaf is 40 mm.
2. The frame of door leaf is made of joined solid pine with a minimum width of 65 mm.
3. The places of tie locks are strengthened with additional timbers with a minimum width of 33 mm. 
4. While manufacturing of the doors honeycomb made of moisture-resistant MDF is used. It helps to reduce the weight of the doors without a significant loss of strength characteristics.
5. Places of milling are made of laminated board with MDF insert that protects these spots from possible cracking.
6. Facing of the door leaf is made of moisture-resistant MDF (4 mm thick).
7. Finishing of the door leaf is made of natural veneer of various species of wood: oak, mahogany, wenge, etc.
8. The canvas is covered with several layers of polyurethane lacquer or UV-lacquer which prevents the doors from the penetration of moisture, mechanical damage and fading.
The production capacity of “Lesozavod” allow to produce customized internal doors in various configurations and various finishes.
The maximum size of the customized door leaf is 2100 mm x 1000 mm.
While the manufecturing of “PleskovDoor” interior doors the following types of finish are used:
When buying “PleskovDoor” brand interior doors we recommended to purchase the box and trim, because the doors and their components are made of natural materials which may vary in shades under various conditions of manufecturing.
|
äóá |
äóá |
äóá |
äóá |
äóá |
âåíãå |
|
|
|
|
|
|
|
|
ñàïåëè |
ñàïåëè |
ìàêîðå |
àíåãðè |
àíåãðè |
|
|
|
|
|
|
|
