Co. Ltd “Pskov Door Factory “: features of door production.Co. Ltd “Pskov Door Factory “: features of door production.
Co. Ltd “Pskov Door Factory“ is a particularized manufacture of internal doors made of natural environmentally clean materials. The production base of “Pskov Door Factory“ Co. Ltd is based on the modern high-tech foreign equipment. This allows manufacturing of high quality products in the shortest time possible. The existing production capacities allow to produce interior doors of various designs. However, the main production is concentrated on the manufacturing of framed veneered internal doors of “PleskovDoor” trademark. 
The main advantage of the “PleskovDoor” manufactured framed doors is a way to fix the panels in the frame of the door leaf: the paneling is installed in a specially cut groove with depth up to 10 mm and then is fixed with strips, which makes the interior door construction reliable and durable. This method of fastening of the panels is unique and virtually is not used in the interior doors of other manufacturers.
Also, the distinctive construction features of the manufactured paneled interior door “PleskovDoor” are as the following ones:
* The thickness of the door leaf is 40 mm.
* The skeleton of the door leaf is made of joined solid pine with a minimum width of 55 mm.
* In addition, the perimeter frame of the door leaf is reinforced with timbers of joined solid pine with a minimum width of 55 mm and with a special groove for installing of the panels with depth to 10 mm.
* Door curling paneling is made of the moisture-resistant MDF or particle board, veneer, finished in fine wood and covered with several layers of polyurethane lacquer (made in Germany)
* Glazing beads are made of the massif, they are wrapped in the appropriate veneer and covered with several layers of polyurethane varnish .
* Covering of the door leaf is made of moisture-resistant MDF (4 mm thick).
* Finish of the door leaf is made of natural veneer of various species of wood: oak, mahogany, beech, ash, wenge, etc.
* The canvas is covered with several layers of polyurethane lacquer which prevents the door from the penetration of moisture, mechanical damage and fading.
The production capacity of “Pskov Door Factory” Co. Ltd enables to produce doors of various structures in the desired configuration and the required onlay.
The maximum size of the customized door leaf is 2300 mm x 1000 mm.